Comparison of Powder Mixing Methods for Metal Matrix Composite Powders Used In Laser Powder Bed Fusion
DOI:
https://doi.org/10.65834/jdsi.11.37Keywords:
Metal matrix composites, laser powder bed fusion, additive manufacturing, material properties, powder mixingAbstract
Metal matrix composites (MMCs) reinforced with different types of particles offer enhanced mechanical properties for high-performance applications. Laser Powder Bed Fusion (LPBF), has become an innovative way to fabricate these materials, offering light-weight structures and rapid prototyping. In this work, we investigated the impact of three different powder mixing techniques, namely, acoustic, tumbler, and ball milling for mixing of TiC particles with Inconel 625 powders. Meanwhile, micron and nano-sized particles were separately studied to examine particle size effect on reinforcement distribution during powder mixing. With this approach, we aimed to achieve homogeneous dispersion of different size of reinforcements for Inconel 625 while maintaining the spherical morphology of matrix powders. Powder characteristics such as flowability, apparent density, and tap density based on particle size, content and mixing parameters for each method were analyzed. Results revealed that acoustic mixing process achieved uniform dispersion of TiC particles with minimal agglomeration and maintained the spherical shape of the matrix powders. In comparison, ball milling resulted in surface deformation and clusters in mixed powders, while tumbler mixing caused significant agglomeration of reinforcements. The addition of particles and mixing operations lead a slight decrease in flowability of composite powders due to rougher surface texture compared to original Inconel 625 powder. The powders processed with acoustic system showed more enhanced flow properties among these methods and indicated the lowest Hausner ratio. Furthermore, we successfully produced fully dense samples using the powders prepared via acoustic mixer, proving their suitability for LPBF. This work demonstrates the potential use of acoustic mixing as an efficient and a scalable method to produce high-quality MMC powders with enhanced dispersion while meeting the requirements of LPBF processes.
References
AlMangour, B., Grzesiak, D. & Yang, J. (2007). Scanning strategies for texture and anisotropy tailoring during selective laser melting of TiC/316L stainless steel nanocomposites. Journal of Alloys and Compounds, 728, 424-435, https://doi.org/10.1016/j.jallcom.2017.08.022.
Baitimerov, R., Lykov, P., Zherebtsov, D., Radionova, L., Shultc, A., & Prashanth, K. G. (2018). Influence of Powder Characteristics on Processability of AlSi12 Alloy Fabricated by Selective Laser Melting. Materials, 11(5), 742. https://doi.org/10.3390/ma11050742.
Dadbakhsh, S., Mertens, R., Vanmeensel, K., Ji, G., & Kruth, J. P. (2020). In situ transformations during SLM of an ultra-strong TiC reinforced Ti composite. Scientific Reports, 10, https://doi.org/10.1038/s41598-020-67434-3.
Gorji, N. E., O'Connor, R., Mussatto, A., Snelgrove, M., González, P. M., & Brabazon, D. (2019). Recyclability of stainless steel (316 L) powder within the additive manufacturing process. Materialia, 8, https://doi.org/10.1016/j.mtla.2019.100489.
Gu, D., Wang, Z., Shen, Y., Li, Q., & Li, Y. (2009). In-situ TiC particle reinforced Ti–Al matrix composites: Powder preparation by mechanical alloying and Selective Laser Melting behavior. Applied Surface Science, 255(22), 9230–9240. https://doi.org/10.1016/j.apsusc.2009.07.008.
Liu, B., Wildman, R., Tuck, C., Ashcroft, I., & Hague, R. (2011). Investigation the effect of particle size distribution on processing parameters optimisation in selective laser melting process. Additive manufacturing research group, Loughborough University, 227-238.
Murray, J. W., Simonelli, M., Speidel, A., Grant, D. M., & Clare, A. T. (2019). Spheroidisation of metal powder by pulsed electron beam irradiation. Powder Technology, 350, 100–106. https://doi.org/10.1016/j.powtec.2019.03.041.
Niu, H. & Chang, I. (1999). Selective laser sintering of gas and water atomized high speed steel powders. Scripta Materialia, 41(1), 25-30. https://doi.org/10.1016/s1359-6462(99)00089-5.
Parsons, E. M. & Shaik, . S. Z. (2022). Additive manufacturing of aluminum metal matrix composites: Mechanical alloying of composite powders and single track consolidation with laser powder bed fusion, Additive Manufacturing, 50, https://doi.org/10.1016/j.addma.2021.102450.
Poyraz, O. & Kushan, M. (2019). Residual Stress-induced Distortions in Laser Powder Bed Additive Manufacturing of Nickel-based Superalloys. Journal of Mechanical Engineering, 65(6), 343-350. http://dx.doi.org/10.5545/sv-jme.2019.6004.
Smith, T. M., Thompson, A. C., Gabb, T. P., Bowman, C. L., & Kantzos, C. A. (2020). Efficient production of a high-performance dispersion strengthened, multi-principal element alloy. Scientific Reports, 10(1), https://doi.org/10.1038/s41598-020-66436-5.
Thompson, P., Poveda, R., Bezsonov, I., Rossini, M., Orthner, D., Cobb, K., ... & Iqbal, Z. (2019). AlSi10Mg Nanocomposites Prepared by DMLS Using In-Situ CVD Growth of CNTs: Process Effects and Mechanical Characterization. , Orthner, D., Cobb, K., Leng, B., Iqbal, Z., (pp. 41-46). Cham: Springer International Publishing.
Tjong, S. C., 2007. Novel Nanoparticle‐Reinforced Metal Matrix Composites with Enhanced Mechanical Properties. Advanced Engineering Materials, 9(8), 639–652. https://doi.org/10.1002/adem.200700106.
Yang, G., Xie, Y., Zhao, S., Ren, Y., & Wang, C. (2022). Methods and Mechanism of Powder Mixing for Selective Laser Melting. Manufacturing Technology, 22(1), 102–110. https://doi.org/10.21062/mft.2022.006.
Yao, X., Moon, S. K., Lee, B. Y. & Bi, G. (2017). Effects of heat treatment on microstructures and tensile properties of IN718/TiC nanocomposite fabricated by selective laser melting. Int. J. Precis. Eng. Manuf, 18,1693–1701. https://doi.org/10.1007/s12541-017-0197-y.
Zhai, W., Zhou, W., Nai, S. M. L. & Wei, J. (2020). Characterization of nanoparticle mixed 316 L powder for additive manufacturing. Journal of Material Science and Technology, Volume 47, 162–168. https://doi.org/10.1016/j.jmst.2020.02.019.
Zhuang, J., Gu, D., Xi, L., Lin, K., Fang, Y., & Wang, R. (2020). Preparation method and underlying mechanism of MWCNTs/Ti6Al4V nanocomposite powder for selective laser melting additive manufacturing. Powder Technology, 368, 59-69. https://doi.org/10.1016/j.powtec.2020.04.041.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Journal of Defence and Security Industries: Strategy and Technology
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.